Cotside Bumpers

• All Round Protection MWARP & MWCARP

  

  • 

  All Round Protection MWARP
  • Covers side rails head/foot boards
  • Heavily quilted for cushioning
  • Breath through to avoid asphyxiation
  • Closed corners for extra security
  • Fully machine washable for infection control

  Connected All Round Protection MWCARP
  • As above with link sheet attached to close the gap between the bed rail & bed frame, for entrapment avoidance.

• Sleep Safety System SSS

  

  • 

  All Round High Performance Protection.

  The Sleep Safety System  has all round 80mm thick walls.

  All four walls are connected with a base sheet, the mattress sits on top of the base sheet to prevent limbs falling through under the rails.

  Easy to fit. Made in wipe clean vapour permeable material, which can also be machine washed.

   

• Two Rail Bumper with Net Window TRCSB-BLU

  

  • 

  Most profiling beds have full length wooden rails. These bumpers have been designed to fit each rail neatly. Top and bottom pads are connected by a strong see through net which ‘concertinas’ to save space when the sides are lowered. Available in wipe clean material or fully machine washable for infection control.

  • In wipe clean material, with hook and loop fastening, in pairs 200cm long TRCSB-BLU

• Machine Washable Two Rail Bumper with Net Window TRCSBW

  

  • 

  Two Rail Machine Washable Bumpers for INFECTION CONTROL with net window for profiling beds.

  • Quilted and washable, in pairs 180cm long TRCSBW18
  • Quilted and washable, in pairs 200cm long TRCSBW
  • Quilted and washable, in pairs 220cm long TRCSBW22

• Two Rail Bumper with Net Window & Net Base for profiling beds TRCSB-CB

  

  • 

  With net windows, cover top and bottom rails independently. When lowered no part of the padding will come into contact with the floor. Available in wipe clean material.

  • In wipe clean material, with hook and loop fastening with split base unit 200cm long TRCSB-CB
  • In wipe clean material, with hook and loop fastening with split base unit 180cm long TRCSB18-CB
  • In wipe clean material, with hook and loop fastening with split base unit 220cm long TRCSB22-CB

• Two Rail Bumper with Net Window TRCSB

  

  • 

  Most profiling beds have full length wooden rails. These bumpers have been designed to fit each rail neatly. Top and bottom pads are connected by a strong see through net which ‘concertinas’ to save space when the sides are lowered. Available in wipe clean material or fully machine washable for infection control. Three lengths available, with open ends.

  • In wipe clean material, with hook and loop fastening, in pairs 200cm long TRCSB
  • In wipe clean material , with zip fastening, in pairs 200cm long TRCSBZ
  • In wipe clean material, with hook and loop fastening, in pairs 180cm long TRCSB18
  • In wipe clean material, with hook and loop fastening, in pairs 220cm long TRCSB22

• Full Bed Length Bumper CSBPB15PUK - MRSA Resistant

  

  • 

  Full Bed Length Bumper CSBPB15PUK – MRSA Resistant

  • Profiling bed full length bumper with wipe clean cover 79” x 30” (200 x 76cm) CSBPB15PUK

• Cotside Bumper CSB

  

  • 

  To fit a vast range of bed rails from 133cm to 205cm long and various heights. The Basic wipe clean bumper has a foam inner and full length hook and loop fastenings along the bottom edge. Available in extra high to fit high rails when an extra overlay is being used.

  • F.R. foam with wipe clean cover and Hook & Loop 53”x 30” (134 x 76cm) CSB
  • F.R Foam wipe clean vapour permeable cover and hook & loop 53 x 30″(134x76cm) CSB-PU
  • F.R. foam with wipe clean cover and Hook & Loop 72”x 30” (183 x 76cm) CSFB

• Three Rail Bumper with Net Window CASA3R

  

  • 

  Three Rail Bumper with Net Window

  • Paddding for 2 rail bed with 3rd rail extention In wipe clean material, with hook & loop fastening 200cm long CASA3R
  • Paddding for 2 rail bed with 3rd rail extention In wipe clean material, with hook & loop fastening 220cm long CASA3R22

• Full Bed Length Bumper CSBPB

  

  • 

  Profiling bed full length with wipe clean cover.

  • Profiling bed full length with wipe clean cover 79” x 30” (200 x 76cm) CSBPB
  • Profiling bed high sided with wipe clean cover 79” x 38” (200 x 96cm) CSBPBH
  • Profiling bed to cover 3 wooden side rails 79” x 41” (200 x 105cm) CSBPBX

• Conventional Cotside Bumpers with split base for profiling beds CSBPB-CB

  

  • 

  Cotside bumpers to cover the full length of rails on a profiling bed.

  • Profiling bed full length with wipe clean cover, split base unit 79” x 30” (200 x 76cm) CSBPB-CB
  • Profiling bed high sided with wipe clean cover, split base unit 79” x 38” (200 x 96cm) CSBPBH-CB
  • Profiling bed to cover 3 wooden side rails, split base unit 79” x 41” (200 x 105cm) CSBPBX-CB

• High Sided Bumper CSBH

  

  • 

  For use on high side rails when a mattress overlay or alternating pressure mattress is in use.

  • High sided with wipe clean cover and Hook & Loop 53” x 38” (134 x 96cm) CSBH
  • High sided with wipe clean cover closed ends and Hook & Loop 53” x 38” (134 x 96cm) CSBHE
  • High sided with wipe clean cover and Hook & Loop 72” x 38” (183 x 96cm) CSBHL
  • High sided with wipe clean cover closed ends and Hook & Loop 72” x 38” (183 x 96cm) CSBHLE

• Connected Cotside Bumpers CCB

  

  • 

  To close gaps between cotside rail and bed frame. To prevent a patient from pushing limbs between the cot sides and mattress. The mattress holds the unit in place. High Protection Bumper. To avoid entrapment and follow the requirements of the MHRA (Medicines and Healthcare Products Registry Agency) Our latest cotside bumpers incorporate a highly permeable base sheet which connects the two cotside bumpers and forms a safety net to prevent limbs falling through under the rails.

  • 53” x 30” (134 x 76cm) CCB
  • 72” x 30” (183 x 76cm) CCSFB
  • 79” x 30” (200 x 76cm) CCBPB
  • 79” x 38” (200 x 96cm) CCBPBH

  To cover two bar rails with third rail extension

  • 79” x 41” (200 x 105cm) CCBPBX

• Machine Washable Bumpers for INFECTION CONTROL MWB

  

  • 

  Fire retardant polyester quilted bumpers open & closed ended with Hook & Loop to close along bottom edge

  • Open ends 53” x 30” (134 x 76cm) MWB
  • Open ends 53” x 38” (134 x 96cm) MWBH
  • Open ends 72” x 30” (183 x 76cm) MWBL
  • Closed ends, high 53” x 38” (134 x 96cm) MWBHE
  • Closed ends 72” x 38” (183 x 96cm) MWBHLE
  • Open ends 79” x 30” (200 x 76cm) MWBPB
  • Open ends, high 79” x 38” (200 x 96cm) MWBPBH
  • Open ends, high to fit 2 rail bed with 3rd rail extension 79” x 41” (200 x 105cm) MWBPBX

• Machine Washable Bumpers for INFECTION CONTROL with Net Base for profiling beds MWBPB-CB

  

  • 

  Machine Washable Bumpers for INFECTION CONTROL with Net Base for profiling beds

  • Open ends with split base unit 79” x 30” (200 x 76cm) MWBPB-CB
  • Open ends, high with split base unit 79” x 38” (200 x 96cm) MWBPBH-CB
  • Open ends, high to fit 2 rail bed with 3rd rail extension with split base unit 79” x 41” (200 x 105cm) MWBPBX-CB

• Wrap Round Bumpers CSBPBW

  

  • 

  Can be used with metal rails which are not usually full length, giving 200cm length. Double end flaps to wrap round head and foot end of bed to close gaps. Fastening with hook & Loop. Also available in connected form to close gap between bumper & bed rail.

  • To close End gap when using metal rails 79” x 30” (200 x 76cm) CSBPBW
  • To close End gap when using HIGH sided metal rails 79” x 38” (200 x 96cm) CSBPBHW

• Head or Foot Board Protector (singles) HFSTD

  

  • 

  These parts of the bed can now be protected with this wipe clean padded bumper 100cm long – tapered for side rail tracking. All round protection achieved by using full length side bumpers with head and foot board padding. Sold in singles.

  • Head/foot board protectors foam with wipe clean cover HFSTD
  • Bespoke Head/foot board protectors can be made to measure HF

• Machine Washable Head or Foot Board Protectors (singles) MWBHF

  

  • 

  Machine Washable head and foot board protectors. These bed end padding can be washing up to 71° for thermal disinfection in accordance with NHS guidelines. (Document HSG(95)18). Made from durable polyester outer fabric and a soft to the touch fibre filled inner. Held in place with Velcro straps. Size at its widest point 104 to 89 cm, height 58cm. Sold in singles.

  MWBHF

• Side Wedges SW

  

  • 

  Side wedges with draw sheet. This new method of preventing a patient from falling out of bed requires NO RAILS. A draw sheet attaches to the mattress with quick release buckles.Along each side of the bed is a broad 10cm hook & loop strip. On to the strip fixes a 20cm high wedge 90cm long. The draw sheet & the wedges are covered in Vapour Permeable wipe clean fabric – Cotton drawsheet is also available. The patient is able to get out of the bed without the entrapment problem of rails but is also protected from the ‘Roll Out’.

  • Complete with vapour permeable draw sheet 90cm long x 20cm high SW
  • Extra side wedges 90cm long x 20cm high WED
  • Spare draw sheet cotton SWC
  • Spare draw sheet wipe clean SWPU
  • Full length draw sheet (Single bed, P.U. or Cotton) SWFS
  • Full length draw sheet (Single bed, P.U. or Cotton) with 2 pairs of wedges SWFS-W
  • Double bed draw sheet (P.U. or Cotton)SWD

• Quilted Cotside Bumpers with tucks Machine Washable for INFECTION CONTROL CSS

  

  • 

  Quilted Hollow Fibre Filled Cotside Bumpers with Tucks. Covered in a washable F.R. polyester, with extra long tucks to secure under mattress to prevent limbs falling between the rail and mattress. Made with closed ends or open ended in various lengths these are available in fully washable and wipe clean material.

  • Fire Retardant polyester, closed ends, light blue 134cm long CSS
  • Fire Retardant polyester, closed ends, light blue 183cm long CSL
  • Fire Retardant polyester, open ends, light blue 200cm long CS200OE

• Quilted Cotside Bumpers with tucks, wipe clean material CSQ

  

  • 

  Quilted Hollow Fibre Filled Cotside Bumpers with extra long tucks to secure under mattress to prevent limbs falling between the rail and mattress. Made with closed ends or open ended in various lengths these are available in wipe clean material, in cream.

  • Wipe clean quilted bumpers, closed ends, cream 134cm long CSQS
  • Wipe clean quilted bumpers, closed ends, cream 183cm long CSQL
  • Wipe clean quilted bumpers, open ends, cream 200cm long CSQ200

• Deep Pile Polyester - Cosy & Air Permeable! CSHP1

  

  • 

  Deep pile polyester fleece, comfortable, air permeable and washable, hook
  and loop along the full length to close. When the patient is subjected to fits
  – this model will allow air to pass through.

  • 53”x 30” (134 x 76cm) CSHP1
  • 53”x 38” (134 x 96cm) CSHP1H
  • 72”x 30” (183 x 76cm) CSHP18
  • 72”x 38” (183 x 96cm) CSHP18H
  • 79”x 30” (200 x 76cm) CSHP3
  • 79”x 38” (200 x 96cm) CSHP3H

• Net Covers NET

  

  • 

  Net to Close Gaps in Rails
  A simple strong net covers the rails – tea cosy style – tough and closed along the bottom edge.

  • 3 rail model to cover telescopic rails, closed ends 134cm long NET
  • 3 rail model to cover telescopic rails, closed ends 183cm long NETL

  A simple strong net covers the rails – flat topped rails, open ends – tough and closed along the bottom edge.

  • Flat topped rail, open ends 200cm long NETPB

• See Through Rail Protectors CSST

  

  • 

  See Through Rail Protectors

  • Enables the patient to look around
  • Removes any feeling of claustrophobia
  • Clear sides allow continous patient monitoring from a distance

  A rounded foam pad covered in wipe clean material clips onto the top of
  rail and a strong clear PVC panel closes the spaces between the side rails.
  The protectors are held firmly in place by 3 or 4 vertical hook and loop
  straps, depending on the length.Padded top rail and clear sides.

  • 137cm long CSST
  • 183cm long CSST183
  • 200cm long CSSTPB

• Cotside Bumper for profiling bed CSB169-3

  

  • 

  3/4 Length Cotside Bumper for profiling bed.

  • This wipe clean bumper has a foam inner and full length hook and loop fastenings along the bottom edge. Three rail bumper, 169cm in length.