• All Round Protection MWARP & MWCARP

    • View Gallery

    All Round Protection MWARP
    • Covers side rails head/foot boards
    • Heavily quilted for cushioning
    • Breath through to avoid asphyxiation
    • Closed corners for extra security
    • Fully machine washable for infection control

    Connected All Round Protection MWCARP
    • As above with link sheet attached to close the gap between the bed rail & bed frame, for entrapment avoidance.

  • Evacuation Sledge with Pouch EVSG

    • View Gallery

    This device consists of dual inner foam, lower layer firm to ride over any surfaces, carpets, concrete or any bumps like stairs, and an upper layer for patient comfort. There are safety belts and a foot pocket to hold the patient in place, pulling loops at each end and a tough slippery coated bottom side. The loop at the head end is to hold back when descending stairways. One or two people required. The whole item is stored in a pouch and can hang on the wall. EVSG

  • Optimise Community Plus OPCOMP208514

    • View Gallery

    Optimise Community Plus profiling mattress Click on link to access leaflet: Optimise Community Plus

    Community Plus, our new high grade community mattress has been developed with the community hospital bed in mind. The mattress has pressure redistributing properties, which are conducive to helping to reduce the risk of pressure ulcers and has been designed to provide a high level of comfort and support at an affordable price.
    The 4-way turn mattress, is comprised of a double sided castellated high-density combustion modified polyurethane, covered in a multi-stretch vapour-permeable fabric. The cover can be made with either sewn or high frequency welded seams* and has zips on three sides, which can also be concealed with waterfall flaps if required*. OPCOMP208514

  • Optimise Firm Edge Mattress OPFE

    • View Gallery

    This mattress has been introduced to avoid the soft sides of most pressure reducing
    mattress and the risk of falling.
    When a patient rolls they will detect the edge of the bed without any restraint, helping
    to prevent roll out and falls. 198 x 88 x 15cm

    • Pressure reducing profiled mattress.
    • Provides a wider, safer, sleeping surface
    • Safe sides to sit on.
    • Four-way turn to prolong use.
    • Helps patient to stand.
    • Helps transfer to wheelchairs.
    • Helps to prevent roll-out.

  • Optimise Mattress Range

    • View Gallery

    Click on link to access leaflet: MDR Compliant IFU Optimise Range

    A new range of pressure redistributing high specification foam mattresses:

    • Optimise Contour – Anti-pressure HSFM castellated both sides for profiling beds 198x91x15cm OPCTS Single
    • Optimise Contour – Anti-pressure HSFM castellated both sides for profiling beds 198x137x15cm OPCTD Double
    • Optimise Support – Bariatric Anti-pressure HSFM castellated top, high density base 200x120x16cm  OPS 
    • Optimise Reactive – Multi Layer HSFM, sensitive visco elastic top, high density base 198x88x15cm OPR
    • Optimse Support Plus – Optimal pressure care support, HSFM U-shaped side wall construction, castellated inner 198x88x15cm OPSP
    • Optimise Reactive Plus – Optimal pressure care support, HSFM U-shaped side wall construction, visco elastic inner 198x88x15cm OPRP
  • Positioning Wedge PW52

    • View Gallery

    Positioning Wedge, to help keep patient in position, non slip cover, 52 cm long. PW52

  • Sleep Safety System SSS

    • View Gallery

    All Round High Performance Protection.

    The Sleep Safety System  has all round 80mm thick walls.

    All four walls are connected with a base sheet, the mattress sits on top of the base sheet to prevent limbs falling through under the rails.

    Easy to fit. Made in wipe clean vapour permeable material, which can also be machine washed.

     

  • Slippy Heel Protectors WWHCS

    • View Gallery

    Slippy Heel Protector with Lambswool (in pairs)

    The outer shell is a slippy fabric which enables the patient to move their feet easily in bed and avoid any shear force. The Deep Pile Wool cushions the heel, and is able to absorb moisture to a high degree. There is a touch and close fastening, they can be machine washed and tumble dried. In pairs.  – WWHCS

  • Evacuation Overlay EVO

    • View Gallery

    Click on the link to access leaflet: MDR Compliant EVO

    This anti pressure overlay is permanently in place on top of a traditional sprung mattress. It is 90mm deep and the topside is covered in a vapour permeable, two way stretch wipe clean material, the bottom is tough PVC coated for sliding over any surface like stairs. It is held on the bed with tucks which double as cocooning flaps to hold the patient in transit. The flexible nature of the unit enables narrow doorways and stairs to be negotiated. With this device the patient does not have to be transferred. Two people required. EVO

  • Pure Wool Pile Bootee & Heel Protector WWBO

    • View Gallery

    Warm, comfortable and made of 100% pure wool pile, the WWBO is a combined bootie and heel protector.

    • Natural Fibre
    • Pressure-relieving
    • Increased cushioning and comfort
    • Reduced friction and shear force
    • Large opening
    • Fits large, small and swollen feet or ankles
    • One size fits all
    • Fully machine washable
  • Turn Easy Sheets - Fitted Sheets TES

    • View Gallery

    The action of turning in bed can sometimes be difficult but with the help of this new FITTED SHEET with a centre panel of low friction satin, things are different. Getting in and out of bed is also easier. The sides and foot end are made of good quality material to help you from slipping off the edge of the bed and give a certain amount of grip to aid movement. For the less able, there is an optional draw sheet. It has a satin underside and remains in place for the patient to lie on. The two low friction surfaces working together enable a CARER to turn/roll or move the patient up or down the bed. This is accomplished without handling them, thereby facilitating anti-pressure practice where regular turning is required, the long (2 metre) draw sheet can be firmly tucked in ready for the next move. It has been found that because the system is permanently in place there is no searching for a slide sheet, or worse, doing without altogether.Using these sheets is as compliant with tissue viability requirements as it is with moving and handling procedure. Both products are made in our factory in the UK and are fully hot washable.They are found to be very useful, not only in hospitals and nursing homes, but also in domestic situations.The ease of turning takes the strain off the carer’s back.

    The Sizes available for the Fitted Sheet are:

    • Fitted sheet Single Bed overall 200 x 90 cm / Satin 150 x 70 cm TES-FSC
    • Fitted sheet Single Bed overall 200 x 90 cm / Satin full at foot end TES-FSF
    • Fitted sheet Double Bed overall 200 x 137 cm / Satin 150 x 70 cm (one side) TES-FSD
  • Two Rail Bumper with Net Window TRCSB-BLU

    • View Gallery

    Most profiling beds have full length wooden rails. These bumpers have been designed to fit each rail neatly. Top and bottom pads are connected by a strong see through net which ‘concertinas’ to save space when the sides are lowered. Available in wipe clean material or fully machine washable for infection control.

    • In wipe clean material, with hook and loop fastening, in pairs 200cm long TRCSB-BLU
  • Wedge Side Infill WSIF

    • View Gallery

    Wedge Side Infill to fill gap between mattress & bed frame, with wipe clean vapour permeable cover.

    Sizes to order.

  • Anti-Vandal Mattress AV

    • View Gallery

    Anti-Vandal Mattress

    • Bespoke sizes
    • Heavy Duty PVC
    • Internal seams welded & stitched. Foam inserted and completely shut.
    • Varying grades of foam typically medium grade.
    • Waterproof cover
    • Designed for prison and secure units.
    • Fire Retardant to BS7177

     

  • Heel Protectors with 'Cooling' Aperture FFHC-A & FFHC-APU

    • View Gallery

    Padded Heel Protectors with a ‘cooling’ aperture for aeration & gives complete elevation from bed surface, available in either cotton or wipe clean material.

    One size fits all.

    • FFHC-A (cotton)
    • FFHC-PU (wipe clean)
  • Layer of Air Cooling Mattress Topper

    • View Gallery

    The Layer of Air Thermoregulating Mattress Topper is designed to help reduce the symptoms of hot flushes and night sweats. The unique construction of the fabric creates a temperature regulating microclimate. The outer layer of the mattress topper is highly breathable, air and vapour permeable, allowing moisture and heat caused by hot flushes and night sweats to pass through into the Layer of Air. The naturally ventilating Layer of Air then provides a constant source of air flow circulation, ensuring that the moisture and heat evaporates, resulting in a great night’s sleep.

  • Mattress Infill/Extension with Straps IF881815-S

    • View Gallery

    The extension is constructed from standard mattress foam and covered with a stitched 2 way stretch P.U. fabric. The cover can be removed for washing. Two 25mm straps with quick release buckles have been added to the base of the item to hold the infill in place when in use.

    Size: 880 x 180 x 150mm

  • T- Roll Positioning Aids PPA PAS PAM PAL PAEL

    • View Gallery

    The T- Roll positioning aid has tubular shaped CMHR foam core. With a wipe clean vapour permeable cover. T shaped to give comfort and leg support when in a laying position. Cover is zipped on enabling it to be removed and washed.
    Uses are:

    • A positioning aid
    • Support for hip abduction
    • To position lower limbs
    • General control of posture whilst lying supine

    Available in Blue, Cream or Blue/Pink Camouflage.

    There are a choice of five sizes:

    • “T Roll” Paediatric (Billy) L460 x H250 x D100mm PPA
    • “T Roll” Small (Molly) L510 x H300 x D150mm PAS
    • “T Roll” Medium (Annie) L710 x H400 x D150mm PAM
    • “T Roll” Large (Archie) L710 x H400 x D200mm PAL
    • “T Roll” Extra Large (Eddie) L710 x H450 x D200mm PAEL
  • Turn Easy Sheets - Draw Sheets TES

    • View Gallery

    The Sizes available for the Draw Sheets are:

    • 4 Way drawsheet, overall 200 x 145 cm / Satin 150 x 145 cm TES-4DS145
    • 2 Way drawsheet, overall 200 x 145 cm / Satin 150 x 145 TES-2DS145
  • Turn Easy Sheets - Fitted Sheet & Draw Sheet Sets

    • View Gallery

    The Sizes available for the Fitted Sheet & Draw Sheet Sets are:

    • Single Fitted Sheet, overall 200 x 90 cm / Satin 150 x 70 cm plus 2 Way Draw Sheet overall 200 x 145 cm / Satin 150 x 145 cm Set FSC2
    • Single Fitted Sheet, overall 200 x 90 cm / Satin 150 x 70 cm plus 4 Way Draw Sheet overall 200 x 145 cm / Satin 150 x 145 cm Set FSC4
    • Bariatric Fitted Sheet plus 4 Way Draw Sheet Set (4 ft bed) FSC4B
  • Turn Easy Sheets - Sets for use with Alternating Pressure Mattress

    • View Gallery

    When an alternating pressure mattress is in use the Base Sheet with corner securing straps gives easy access for tubes.

    The sets available for the Base Sheet with Corner Securing Straps & Draw Sheets are:

    • Single Base Sheet with Corner Securing Straps plus 2 Way Draw Sheet Set FSC2E
    • Single Base Sheet with Corner Securing Straps plus 4 Way Draw Sheet Set FSC4E
    • Bariatric Base Sheet with Corner Securing Straps plus 4 Way Draw Sheet (4 ft bed) Set FSC4BE
  • E-Roll Positioning Aids E-PAM E-PAL

    • View Gallery

    The E- Roll positioning aid has tubular shaped CMHR foam core. With a wipe clean vapour permeable cover. E shaped to give comfort and leg support when in a laying position. Cover is zipped on enabling it to be removed and washed.

    Available in Blue or Cream.

    Two Sizes Available:

    • E-PAM – Medium 900 x 200 x 150mm
    • E-PAL – Large 1100 x 200 x 200mm
  • Machine Washable Two Rail Bumper with Net Window TRCSBW

    • View Gallery

    Two Rail Machine Washable Bumpers for INFECTION CONTROL with net window for profiling beds.

    • Quilted and washable, in pairs 180cm long TRCSBW18
    • Quilted and washable, in pairs 200cm long TRCSBW
    • Quilted and washable, in pairs 220cm long TRCSBW22
  • Base Layer Mattress 50UL

    • View Gallery

    Base Layer Mattress. Gives an even surface on slated bed surfaces and provides a protective underlay in the event of deflation. Being only 50mm deep, “the height above the surface of the top rail” should not be a problem when using a second mattress. 50UL

  • Anti-Pressure Mattress Overlay PFS PFD

    • View Gallery

    Click on the link to access leaflet: MDR Compliant IFU PFS PFD

    Anti-pressure modular foam overlay with wipe clean vapour permeable cover.

    OVERLAY single bed size 190 x 87 x 9cm

    • Pad only PFSP
    • Cover PFSC
    • Complete PFS

    OVERLAY double bed size 200 x 137 x 9cm

    • Pad only PFDP
    • Cover PFDC
    • Complete PFD
  • Compact Evacuation Mat EVM-W

    • View Gallery

    Our new Evacuation mat is designed to be small and compact as well as being very hard wearing. The unit in constructed of highly durable fabric with a foam pad for comfort. The principles of the unit are the same as with all our evacuation products. The webbing runs the full length of the unit encapsulating both head and foot end pulling straps in one piece of very strong webbing. Together with the two body straps for tall and short patients. Once the patient is on the unit they can be enveloped for security by the wings on either side. Secured by the webbing and buckles and then pulled to safety by means of the head and foot pull straps. A slippy underside ensures ease of movement on any surface, such as carpet, vinyl or concrete. A risk assessment needs to be carried out prior to any training or emergency. The unit has a SWL of 150kg.

  • Cradle to hold active mattress and fill side gap CRD

    • View Gallery

    Cradle to hold active mattress and fill side gaps. Complete. To hold either a static or alternating anti-pressure mattress. When inflated air mattresses are narrower than the bed leaving a possible entrapment space at the sides. The cradles raised sides help to fill these gaps.CRD

  • Mattress end infill IF

    • View Gallery

    Mattress End Infill, standard size 90 x 20 x 15cm. Foam Inner with wipe clean vapour permeable,  4-way stretch cover, zip to close. The cover can be removed and washed to 75⁰.

    Bespoke sizes can be ordered on request. IF

  • Slide Sheets SSS

    • View Gallery

    Slide Sheets help move a patient more easily on a bed or floor. Manufactured in tubular form so that siliconed nylon surfaces help positioning.

    • Small slide sheet in tubular form (Yellow) 70 x 70 cm SSS
    • Medium slide sheet in tubular form (Blue) 120 x 70 cm SSM
    • Large slide sheet in tubular form (Red) 150 x 70 cm SSL
    • Wide slide sheet in tubular form (Green) 125 x 100 cm SSW
    • Extra long slide sheet in tubular form (Burgundy) 75 x 200 cm SSEL
    • Extra long, extra wide slide sheet in tubular form (Blue) 195 x 145 cm SSEWL
    • Small one person use slide sheet (Red) 70 x 75cm Pack of 10 DSS10-77
    • Medium one person use slide sheet (Red) 70 x 100cm Pack of 10 DSS10-710
    • Large one person use slide sheet (Red) 90 x 120cm Pack of 10 DSS10-912
    • Wide one person use slide sheet (Red) 80 x 150cm Pack of 10 DSS10-815
  • Incontinence Bed Pads - Reusable BPWT / BPT / BPW / BPX / BPXNT / BPWTD

    • View Gallery

    High Absorbency, Easy Wash & Dry – 300 Washes. Designed to feel and look like normal bedding when in place.
    Made with tucks to secure to bed mattress. Available in both single and double bed sizes and with or without tucks. Absorbs approx 3 litres. All bed pads and chair pads are available in Blue, Burgundy and Tartan

    • Bed pad with tucks, waterproof back 28” x 36” 72 x 91cm BPWT
    • Bed pad with tucks, no waterproof back 28” x 36” 72 x 91cm BPT
    • Without tucks, waterproof back 28” x 36” 72 x 91cm BPW
    • Extra large with tucks, waterproof back 36” x 36” 91 x 91cm BPX
    • Extra large no tucks, waterproof back 36” x 36” 91 x 91cm BPXNT
    • Double bed pad with tucks, waterproof back 54” x 36” 137 x 91cm BPWTD
  • Seat Pads - Reusable BPSP / BPSBW

    • View Gallery

    Reusable versatile seat pads, can be machine washed up to 300 times. Placed discreetly to protect armchair, car seat or wheelchair. Absorbs approx 1 litre.

    • Seat pad blue, mint green, sage, floral, burgundy or tartan pad, waterproof back 27” x 20” 69 x 51cm BPSP
    • Wheelchair pad blue, mint green, sage, floral, burgundy or tartan, waterproof back 18” x 20” 46 x 51cm BPSPW
  • Towelling Waterproof Fitted Sheets TWFS / TWFD

    • View Gallery

    Towelling face, waterproof backed, fitted sheet to protect the mattress and at the same time give the feel of a normal sheet. Available for both single and double bed sizes.

    • Single bed TWFS
    • Double bed TWFD
  • Mattress Protector MPPS / MPPD

    • View Gallery

    Waterproof soft fitted sheet.

    • Single bed MPPS
    • Double bed MPPD
  • P.U. Mattress Protector MPPUS / MPPUD

    • View Gallery

    Waterproof P.U membrane fitted mattress protector, vapour permeable, soft, silent and washable.

    • Single MPPUS
    • Double MPPUD
  • Draw Sheet P.U. DSPU

    • View Gallery

    Simple draw sheet in soft P.U to protect mattress from light incontinence.
    110 x 150cm DSPU

  • Draw Sheet P.V.C. DSPVC

    • View Gallery

    Simple draw sheet in soft P.V.C.to protect mattress from light incontinence.
    122 x 150cm DSPVC

  • Duvets DSGD / DSGDD

    • View Gallery

    Made with a wipe clean, vapour permeable fabric – soft & drapeable.

    • Single bed DSGD
    • Double bed DSGDD
  • Pillow PW

    • View Gallery

    All wipe clean, vapour permeable, hollow fibre filled PW

  • Real Sheepskin Heel Protectors & Elbow Protectors SWHC

    • View Gallery

    Give maximum protection to those at risk. Held in place with a soft strapping and hook and loop, these medical sheepskin products can be machine washed. SWHC

  • Fall Out Mat FOM

    • View Gallery

    Heavy duty dense foam crash mat can be used with standard bed to low level beds. Folds easily for storing – cover is non slip wipe clean material. Also available in 3 section economy foam & 1 section high density or economy foam.

    • High density foam 3 section folding floor mat covered in wipe clean material 183 x 60 x 5cm FOM
    • 3 section economy foam covered floor mat in wipe clean material 183 x 60 x 5cm FOME
    • High density foam 1 section floor mat in wipe clean material 183 x 60 x 5cm FOM1
    • 1 section economy foam floor mat in wipe clean material 183 x 60 x 5cm FOM1E
    • Wipe Clean cover for Standard Fall Out Mat FOM-C
  • Two Rail Bumper with Net Window & Net Base for profiling beds TRCSB-CB

    • View Gallery

    With net windows, cover top and bottom rails independently. When lowered no part of the padding will come into contact with the floor. Available in wipe clean material.

    • In wipe clean material, with hook and loop fastening with split base unit 200cm long TRCSB-CB
    • In wipe clean material, with hook and loop fastening with split base unit 180cm long TRCSB18-CB
    • In wipe clean material, with hook and loop fastening with split base unit 220cm long TRCSB22-CB
  • Two Rail Bumper with Net Window TRCSB

    • View Gallery

    Most profiling beds have full length wooden rails. These bumpers have been designed to fit each rail neatly. Top and bottom pads are connected by a strong see through net which ‘concertinas’ to save space when the sides are lowered. Available in wipe clean material or fully machine washable for infection control. Three lengths available, with open ends.

    • In wipe clean material, with hook and loop fastening, in pairs 200cm long TRCSB
    • In wipe clean material , with zip fastening, in pairs 200cm long TRCSBZ
    • In wipe clean material, with hook and loop fastening, in pairs 180cm long TRCSB18
    • In wipe clean material, with hook and loop fastening, in pairs 220cm long TRCSB22
  • Full Bed Length Bumper CSBPB15PUK - MRSA Resistant

    • View Gallery

    Full Bed Length Bumper CSBPB15PUK – MRSA Resistant

    • Profiling bed full length bumper with wipe clean cover 79” x 30” (200 x 76cm) CSBPB15PUK
  • Cotside Bumper CSB

    • View Gallery

    To fit a vast range of bed rails from 133cm to 205cm long and various heights. The Basic wipe clean bumper has a foam inner and full length hook and loop fastenings along the bottom edge. Available in extra high to fit high rails when an extra overlay is being used.

    • F.R. foam with wipe clean cover and Hook & Loop 53”x 30” (134 x 76cm) CSB
    • F.R Foam wipe clean vapour permeable cover and hook & loop 53 x 30″(134x76cm) CSB-PU
    • F.R. foam with wipe clean cover and Hook & Loop 72”x 30” (183 x 76cm) CSFB
  • Three Rail Bumper with Net Window CASA3R

    • View Gallery

    Three Rail Bumper with Net Window

    • Paddding for 2 rail bed with 3rd rail extention In wipe clean material, with hook & loop fastening 200cm long CASA3R
    • Paddding for 2 rail bed with 3rd rail extention In wipe clean material, with hook & loop fastening 220cm long CASA3R22
  • Full Bed Length Bumper CSBPB

    • View Gallery

    Profiling bed full length with wipe clean cover.

    • Profiling bed full length with wipe clean cover 79” x 30” (200 x 76cm) CSBPB
    • Profiling bed high sided with wipe clean cover 79” x 38” (200 x 96cm) CSBPBH
    • Profiling bed to cover 3 wooden side rails 79” x 41” (200 x 105cm) CSBPBX
  • Conventional Cotside Bumpers with split base for profiling beds CSBPB-CB

    • View Gallery

    Cotside bumpers to cover the full length of rails on a profiling bed.

    • Profiling bed full length with wipe clean cover, split base unit 79” x 30” (200 x 76cm) CSBPB-CB
    • Profiling bed high sided with wipe clean cover, split base unit 79” x 38” (200 x 96cm) CSBPBH-CB
    • Profiling bed to cover 3 wooden side rails, split base unit 79” x 41” (200 x 105cm) CSBPBX-CB
  • High Sided Bumper CSBH

    • View Gallery

    For use on high side rails when a mattress overlay or alternating pressure mattress is in use.

    • High sided with wipe clean cover and Hook & Loop 53” x 38” (134 x 96cm) CSBH
    • High sided with wipe clean cover closed ends and Hook & Loop 53” x 38” (134 x 96cm) CSBHE
    • High sided with wipe clean cover and Hook & Loop 72” x 38” (183 x 96cm) CSBHL
    • High sided with wipe clean cover closed ends and Hook & Loop 72” x 38” (183 x 96cm) CSBHLE
  • Connected Cotside Bumpers CCB

    • View Gallery

    To close gaps between cotside rail and bed frame. To prevent a patient from pushing limbs between the cot sides and mattress. The mattress holds the unit in place. High Protection Bumper. To avoid entrapment and follow the requirements of the MHRA (Medicines and Healthcare Products Registry Agency) Our latest cotside bumpers incorporate a highly permeable base sheet which connects the two cotside bumpers and forms a safety net to prevent limbs falling through under the rails.

    • 53” x 30” (134 x 76cm) CCB
    • 72” x 30” (183 x 76cm) CCSFB
    • 79” x 30” (200 x 76cm) CCBPB
    • 79” x 38” (200 x 96cm) CCBPBH

    To cover two bar rails with third rail extension

    • 79” x 41” (200 x 105cm) CCBPBX
  • Machine Washable Bumpers for INFECTION CONTROL MWB

    • View Gallery

    Fire retardant polyester quilted bumpers open & closed ended with Hook & Loop to close along bottom edge

    • Open ends 53” x 30” (134 x 76cm) MWB
    • Open ends 53” x 38” (134 x 96cm) MWBH
    • Open ends 72” x 30” (183 x 76cm) MWBL
    • Closed ends, high 53” x 38” (134 x 96cm) MWBHE
    • Closed ends 72” x 38” (183 x 96cm) MWBHLE
    • Open ends 79” x 30” (200 x 76cm) MWBPB
    • Open ends, high 79” x 38” (200 x 96cm) MWBPBH
    • Open ends, high to fit 2 rail bed with 3rd rail extension 79” x 41” (200 x 105cm) MWBPBX
  • Machine Washable Bumpers for INFECTION CONTROL with Net Base for profiling beds MWBPB-CB

    • View Gallery

    Machine Washable Bumpers for INFECTION CONTROL with Net Base for profiling beds

    • Open ends with split base unit 79” x 30” (200 x 76cm) MWBPB-CB
    • Open ends, high with split base unit 79” x 38” (200 x 96cm) MWBPBH-CB
    • Open ends, high to fit 2 rail bed with 3rd rail extension with split base unit 79” x 41” (200 x 105cm) MWBPBX-CB
  • Wrap Round Bumpers CSBPBW

    • View Gallery

    Can be used with metal rails which are not usually full length, giving 200cm length. Double end flaps to wrap round head and foot end of bed to close gaps. Fastening with hook & Loop. Also available in connected form to close gap between bumper & bed rail.

    • To close End gap when using metal rails 79” x 30” (200 x 76cm) CSBPBW
    • To close End gap when using HIGH sided metal rails 79” x 38” (200 x 96cm) CSBPBHW
  • Head or Foot Board Protector (singles) HFSTD

    • View Gallery

    These parts of the bed can now be protected with this wipe clean padded bumper 100cm long – tapered for side rail tracking. All round protection achieved by using full length side bumpers with head and foot board padding. Sold in singles.

    • Head/foot board protectors foam with wipe clean cover HFSTD
    • Bespoke Head/foot board protectors can be made to measure HF
  • Machine Washable Head or Foot Board Protectors (singles) MWBHF

    • View Gallery

    Machine Washable head and foot board protectors. These bed end padding can be washing up to 71° for thermal disinfection in accordance with NHS guidelines. (Document HSG(95)18). Made from durable polyester outer fabric and a soft to the touch fibre filled inner. Held in place with Velcro straps. Size at its widest point 104 to 89 cm, height 58cm. Sold in singles.

    MWBHF

  • Side Wedges SW

    • View Gallery

    Side wedges with draw sheet. This new method of preventing a patient from falling out of bed requires NO RAILS. A draw sheet attaches to the mattress with quick release buckles.Along each side of the bed is a broad 10cm hook & loop strip. On to the strip fixes a 20cm high wedge 90cm long. The draw sheet & the wedges are covered in Vapour Permeable wipe clean fabric – Cotton drawsheet is also available. The patient is able to get out of the bed without the entrapment problem of rails but is also protected from the ‘Roll Out’.

    • Complete with vapour permeable draw sheet 90cm long x 20cm high SW
    • Extra side wedges 90cm long x 20cm high WED
    • Spare draw sheet cotton SWC
    • Spare draw sheet wipe clean SWPU
    • Full length draw sheet (Single bed, P.U. or Cotton) SWFS
    • Full length draw sheet (Single bed, P.U. or Cotton) with 2 pairs of wedges SWFS-W
    • Double bed draw sheet (P.U. or Cotton)SWD
  • Quilted Cotside Bumpers with tucks Machine Washable for INFECTION CONTROL CSS

    • View Gallery

    Quilted Hollow Fibre Filled Cotside Bumpers with Tucks. Covered in a washable F.R. polyester, with extra long tucks to secure under mattress to prevent limbs falling between the rail and mattress. Made with closed ends or open ended in various lengths these are available in fully washable and wipe clean material.

    • Fire Retardant polyester, closed ends, light blue 134cm long CSS
    • Fire Retardant polyester, closed ends, light blue 183cm long CSL
    • Fire Retardant polyester, open ends, light blue 200cm long CS200OE
  • Quilted Cotside Bumpers with tucks, wipe clean material CSQ

    • View Gallery

    Quilted Hollow Fibre Filled Cotside Bumpers with extra long tucks to secure under mattress to prevent limbs falling between the rail and mattress. Made with closed ends or open ended in various lengths these are available in wipe clean material, in cream.

    • Wipe clean quilted bumpers, closed ends, cream 134cm long CSQS
    • Wipe clean quilted bumpers, closed ends, cream 183cm long CSQL
    • Wipe clean quilted bumpers, open ends, cream 200cm long CSQ200
  • Deep Pile Polyester - Cosy & Air Permeable! CSHP1

    • View Gallery

    Deep pile polyester fleece, comfortable, air permeable and washable, hook
    and loop along the full length to close. When the patient is subjected to fits
    – this model will allow air to pass through.

    • 53”x 30” (134 x 76cm) CSHP1
    • 53”x 38” (134 x 96cm) CSHP1H
    • 72”x 30” (183 x 76cm) CSHP18
    • 72”x 38” (183 x 96cm) CSHP18H
    • 79”x 30” (200 x 76cm) CSHP3
    • 79”x 38” (200 x 96cm) CSHP3H
  • Maximise Contour Cushion MXCC (PFC)

    • View Gallery

    Click on link to access leaflet: MDR Compliant IFU Maximise Cushions

    Modular foam, pressure reducing cushion with multi-stretch vapour permeable cover.
    43 x 41 x 10cm MXCC (PFC)

     

  • Maximise Visco Cushion MXVC (PFCV)

    • View Gallery

    Click on link to access leaflet: MDR Compliant IFU Maximise Cushions

    Memory foam Combi cushion with Vapour Permeable cover. Top layer memory foam bottom layer firmer supporting foam for comfort. Available with removable cover wipe clean or terry towelling.
    43 x 41 x 10cm MXVC (PFCV)

  • Net Covers NET

    • View Gallery

    Net to Close Gaps in Rails
    A simple strong net covers the rails – tea cosy style – tough and closed along the bottom edge.

    • 3 rail model to cover telescopic rails, closed ends 134cm long NET
    • 3 rail model to cover telescopic rails, closed ends 183cm long NETL

    A simple strong net covers the rails – flat topped rails, open ends – tough and closed along the bottom edge.

    • Flat topped rail, open ends 200cm long NETPB
  • Maximise Plus - Bariatric Seat Cushion - MXPC (3LBC5646)

    • View Gallery

    Click on link to access Leaflet: MDR Compliant IFU Maximise Cushions

    Maximise Plus – Bariatric Seat Cushion. Triple layer foam with a firm base layer, high resiliant CMHR middle and a comfortable top of high quality visco elastic memory foam.
    The wipe clean welded cover is made of vapour permeable fabric which is two way stretch for maximum comfort. The cushion has a non-slip base and waterfall flap to prevent liquid ingress.

    Suitable for heavier patients up to 50 Stone (318 Kilo’s)

    56 x 46 x 10 cm  3LBC5646

  • See Through Rail Protectors CSST

    • View Gallery

    See Through Rail Protectors

    • Enables the patient to look around
    • Removes any feeling of claustrophobia
    • Clear sides allow continous patient monitoring from a distance

    A rounded foam pad covered in wipe clean material clips onto the top of
    rail and a strong clear PVC panel closes the spaces between the side rails.
    The protectors are held firmly in place by 3 or 4 vertical hook and loop
    straps, depending on the length.Padded top rail and clear sides.

    • 137cm long CSST
    • 183cm long CSST183
    • 200cm long CSSTPB
  • Shearex Pure Woolpile Fleece WW

    • View Gallery

    Deep pile wool fleece gives a gentle natural interface which is usually missing from modern pressure reducing surfaces. Hot washable. Also available in deep pile polyester.

    • 14” x 18” (36 x 46cm) WW1418
    • 18” x 18” (46 x 46cm) WW1818
    • 24” x 30” (61 x 76cm) WW2430
    • 27” x 30” (68 x 76cm) WW2730
    • 27” x 60” (68 x 152cm) WW2760
    • 36” x 60” (91 x 152cm) WW3660
    • 30” x 40” (76 x 102cm) WW3040
  • Nursing Fleece - Polyester HP

    • View Gallery

    Deep pile 100% polyester fleeces have been used in hospitals and the community for many years. They give comfort on boney parts of the body, are easy to wash & dry and are very economical.

    • 14” x 18” (36 x 46cm) HP1418
    • 18” x 18” (46 x 46cm) HP1818
    • 24” x 30” (61 x 76cm) HP2430
    • 27” x 30” (68 x 76cm) HP2730
    • 27” x 60” (68 x 152cm) HP2760
    • 36” x 60” (91 x 152cm) HP3660
    • 30” x 40” (76 x 102cm) HP3040
  • Cotside Bumper for profiling bed CSB169-3

    • View Gallery

    3/4 Length Cotside Bumper for profiling bed.

    • This wipe clean bumper has a foam inner and full length hook and loop fastenings along the bottom edge. Three rail bumper, 169cm in length.
  • Evacuation Sheet EVS

    • View Gallery

    Evacuation sheet to be permanently in place under anti pressure mattress. This fixes permanently to the bottom of a flexible foam mattress by means of strong elastics. It has safety belts to hold the patient on the mattress and pulling straps at each end. The combination of slippery sheet and mattress which will flex, will pass through narrow doorways and down stairs. The holding strap at the head is to hold back on stairways. Two people required. No transferring of patient. There are pockets for the straps. EVS

  • Prone Wedges PWS

    • View Gallery

    Used in the prone position to facilitate head, shoulder and arm movement. Made with combustion modified foam and FR wipe-clean vapour permeable cover. With carry strap. There is a choice of three sizes:

    • Prone wedge – Small lowest height 25 mm L300 x W300 x H75/25mm PWS
    • Prone wedge – Medium lowest height 50 mm L650 x W600 x H175/50mm PWM
    • Prone wedge – Large lowest height 50 mm L650 x W600 x H250/50mm PWL
  • Postural Rolls PRS

    • View Gallery

    Postural rolls are useful in various therapeutic activities for moving weight, rolling about balancing etc. Made with combustion modified foam and FR wipe-clean vapour permeable cover. With carry strap.

    • Posture roll – Small L600 x Dia200 mm PRS
    • Posture roll – Medium L900 x Dia300mm PRM
    • Posture roll – Large L900 x Dia375mm PRL
  • Bed Wedges FWL

    • View Gallery

    Many uses for these bed wedges include – A sitting up back rest or pillow raiser. Made of polyurethane foam and covered in a vapour permeable wipe clean fabric.

    • Foam wedge with wipe clean cover 610 x 610 x 300mm FWL
  • Bed Wedges FWL22FR

    • View Gallery

    Designed to position you correctly and comfortably for optimal postural support, this wedge shaped cushion is soft and comfortable. It also benefits from a washable cotton cover, with 3 zipped sides for easy removal.

    • Foam wedge with FR cover 560 x 560 x 230mm FWL22FR
  • Bed Wedges FWS

    • View Gallery

    Many uses for these bed wedges include – A foot raiser or a prone wedge. Made of polyurethane foam and covered in a vapour permeable wipe clean fabric.

    • Foam wedge with wipe clean cover 22” x 15” x 5” 56 x 38 x 13cm FWS
  • 45 Degree Wedge FWL1818

    • View Gallery

    45 Degree Wedge

    Many uses for these bed wedges include – A sitting up back rest or pillow raiser. Made of polyurethane foam and covered in a vapour permeable wipe clean fabric.

    • Foam wedge with wipe clean cover 460 x 460 x 460mm FWL1818
  • Double Knee Wedge KBW

    • View Gallery

    This double knee cushion wedge simulates the action of a knee break on a profiling bed preventing the patient from slipping down the bed at the same time reducing pressure on the heels. Covered in vapour permeable wipe clean material and has a non slip base. KBW

  • Mattress side filler MSF

    • View Gallery

    Mattress Side Filler Sizes to order

    Foam Inner with wipe clean vapour permeable,  4-way stretch cover, zip to close.

    The cover can be removed and washed to 75⁰. MSF

  • Smoking Apron SAP

    • View Gallery

    A full fire retardant apron for use in a room, set a side for smokers or on the terrace. Wide enough to cover both knees and chair arms, leaving no side gaps. SAP

  • Palm Protector PPL/PPR

    • View Gallery

    Palm Protector with Fleece Lining (individual) – To help prevent patients digging their nails into the palms. Made of high density closed cell foam with fleece to the inner layer. Hook & loop on the back to hold in position.

    • PPL(Left)
    • PPR(Right)
  • Leg Trough THS THS-43 THS-61

    • View Gallery

    Click on the link to access leaflet: MDR Compliant IFU THS THS43 THS61

    This leg support not only offers comfort in raising the leg but will keep the heel above the bed surface and completely relieves pressure on the heel. THS THS-43 THS-61

  • Foot Elevator FRD / FRDC

    • View Gallery

    Foot Elevator to raise foot clear of the bed. This foam ring with top opening raises the heel from bed to
    promote healing with no pressure at all! Available with wipe clean vapour permeable cover or without cover for patient use.

    • Foam ring only – splits for fitting FRD
    • Foam ring with vapour permeable cover FRDC
  • Heel Protectors FFHC

    • View Gallery

    Fibre filled heels protectors. Hollow fibre inner to reduce the pressure on the heel area, along with high sided bootee wall to protect the ankles for coming in contact with each other. The bootees are manufactured in such a way to help patients with drop foot and malposition. The outer material is an inherently fire retardant with soft foam covered strapping to keep in place. One size fits all. FFHC

  • Multi-Mover Flat Sheet MM

    • View Gallery

    Multi-Mover Flat Sheet
    & Extra Wide Multi-Mover Flat Sheet.

    Coated Nylon Flat Sheet, with handles on three sides. To assist in the positioning of patients/clients. Can be used either in singles or in pairs.

    Sizes Available:

    • MM2070 Flat Sheet – 2000 x 700mm
    • MM2090 Extra Wide Flat Sheet – 2000 x 900mm
  • Footboard FB1M / FB2D

    • View Gallery

    To prevent user from slipping down the bed. Covered in simulated sheepskin. Available for divan beds or metal frame beds, easy and quick to fit any size of bed.

    • Suitable for metal frame beds FB1M
    • Suitable for divan bed FB2D
  • Adult Clothing Protectors TNBS / TNBL

    • View Gallery

    Washable clothing protection comes in two sizes and two colours. A deluxe soft brushed poly viscose surface with a superior waterproof backing. Studs or hook and loop fastenings

    • Tartan cotton face – waterproof back (small) TNBS
    • Tartan cotton face – waterproof back (large) TNBL
  • "Sit Right In Bed" BRA

    • View Gallery

    The back & arms of a chair make sitting up in bed more comfortable – elbows come into their own. Simulated lambs wool cover and a pocket. BRA

  • Heel Protectors & Elbow Protectors - Pure wool Pile WWHC / WWEP

    • View Gallery

    Heels & elbows are always at risk from pressure problems. The most popular aid for protection is fitting a simple heel cup in either wool pile or polyester. A soft strap with Velcro will hold the cup in place.

    • Heel Protectors cup type with Velcro (pair) WWHC
    • Elbow Protectors with Velcro (pair) WWEP
  • Maximise Twist MXTC (3LMC43)

    • View Gallery

    Click on link to access leaflet: MDR Compliant IFU Maximise Cushions

    Maximise Twist – 3 Layer Memory foam Combi cushion with Vapour Permeable cover
    43 x 43 x 7.5cm MXTC (3LMC43)

  • Flat Slide Sheets SSF

    • View Gallery

    Flat Slide Sheets to assist in the moving and handling of patients either in bed or on the floor.

    • Flat slide sheet (Red) 122 x 100 cm SSF-1221
    • Small flat slide sheet (Red) 90 x 140 cm SSF-914
    • Medium flat slide sheet (Red) 75 x 200 cm SSF-720
    • Large flat slide sheet (Red) 100 x 200 cm SSF-1020
    • Wide flat slide sheet (Red) 150 x 200 cm SSF-1520
  • Genuine Medical Full Sheep Skin MSS

    • View Gallery

    The original method of helping to prevent pressure sores. Large skin with dense pile, hot washable and specially treated to withstand years of use. MSS

  • Maximise Contour Cushion with terry towelling cover MXCCT (PFT)

    • View Gallery

    Click on link to access leaflet: MDR Compliant IFU Maximise Cushions

    Modular foam with terry towelling cover
    43 x 41 x 10cm MXCCT (PFT)

  • Wheelchair Fleece WW736L

    • View Gallery

    In pure wool pile honey beige colour, with strong loops to hook round
    wheelchair handles to keep the fleece in position.

    • Wheelchair Fleece – WW736L

    In pure wool pile honey beige colour, with strong loops to hook round
    wheelchair handles to keep the fleece in position. With attached arm covers.

    • Wheelchair Fleece – WW736A
  • Maximise Contour with 100% Wool Pile Cushion Cover MXCCW (FCWT)

    • View Gallery

    Click on link to access leaflet: MDR Compliant IFU Maximise Cushions

    Maximise Contour – Combustion Modified foam with 100% wool pile cushion cover, allowing natural pressure relief and also modular foam inner to enhance the pressure reducing properties.
    43 x 41 x 10cm MXCCW (FCWT)

  • Bariatric Cushion FC20

    • View Gallery

    Click on the link to access leaflet: MDR Compliant IFU FC20

    Two Layer Bariatric Cushion. The wipe clean cover is made of vapour permeable fabric which is two way stretch for maximum comfort. The cushion has a waterfall flap to prevent liquid ingress. Suitable for heavier patients up to 50 Stone (318 Kilo’s)

    51 x 46 x 10cm FC20

     

  • Calf Strap CS

    • View Gallery

    100% pure wool pile (20.3cm or 8 inches high) strap to stop the ‘pressing back’ action of the user, and also for comfort. With strap to attach to foot rest legs.

    • Calf Strap – CS
  • Comfort Cushion - FC172V

    • View Gallery

    Lightweight, portable cushion. High specification foam, spreads weight evenly. Wipe clean Vapour permeable cover. Suitable for both wheelchairs & armchairs.

    43 x 43 x 5cm FC172V

  • Padded Wheelchair Set FFCS

    • View Gallery

    Hollow fibre filled wheelchair padded set, comprising of a base cushion, back piece and two arm cushions connected together with hook and loop to prevent single unit moving out of position.
    Available in cotton or wipe clean. FFCS

  • U Shaped Commode Cushion FFU

    • View Gallery

    Hollow fibre inner ‘U’ shaped Commode Cushion. Designed to fit most commode seats, with hook and loop ties to hold in place, vapour permeable wipe clean cover. FFU

  • Wheelchair Arm Rest Covers ARCO

    • View Gallery

    Arm Rest covers in Wool Pile – open

    • Arm Rest Covers Open Sided Chair ARCO

    Arm Rest Covers in Wool Pile – closed

    • Arm Rest Covers Closed Sided Chair in Wool Pile ARCC
  • Commode Cushion FFWR

    • View Gallery

    Hollow fibre inner Ring Cushion with wipe clean vapour permeable cover . Can be used on most
    commodes or toilet seats to provide comfort, with wipe clean vapour permeable cover.FFWR

  • Elbow Protectors - 100% Polyester Fleece HPEP

    • View Gallery

    100% Hospital quality deep pile polyester elbow protector for comfort and ease of washing and drying – suitable for hospital laundries.

    • Elbow Protectors with Velcro (pair) HPEP
  • Heel Protectors - 100% Polyester Fleece HPHC

    • View Gallery

    100% Hospital quality deep pile polyester heel protector for comfort and ease of washing and drying – suitable for hospital laundries.

    • Heel Protectors cup type with Velcro (pair) HPHC
  • Ring Cushion FFCR

    • View Gallery

    Hollow fibre inner Ring Cushion with cotton cover FFCR

  • Hollow Fibre Filled Cushions FFWC / FFHHC / FFCC

    • View Gallery

    Hollow Fibre Filled Cushions with various cover options.

    • Hollow fibre inner with wipe clean cover FFWC
    • Hollow fibre inner with half wipe clean half cotton cover FFHHC
    • Hollow fibre inner with all F.R. cotton cover FFCC
  • Open Booties - Make a slipper round the foot (pair) WWOB / HPOB

    • View Gallery

    Open booties give protection to the foot and ankle. They come in one size, flat form and can be molded around an inflexible ankle. Made in deep pile wool or polyester fleece.

    • Pure Wool Pile WWOB
    • 100% Polyester Fleece HPOB
  • V Shaped Backrest Hollow Fibre Filled Cushion FFV / FFVC / FFVW / CVC

    • View Gallery

    V Shaped Backrest Hollow Fibre Filled Cushion.
    Probably the most comfortable back cushion. Giving support when sitting up in bed, where an arrangement of pillows would fail.

    • Hollow fibre inner ‘V’ shaped Backrest inner only FFV
    • Hollow fibre inner ‘V’ shaped Backrest with cotton cover complete FFVC
    • Hollow fibre inner ‘V’ shaped Backrest with integral vapour permeable cover (wipe clean) FFVW
    • ‘V’ Shaped Backrest cover in F.R. cotton zipped cover only CVC